MC100ELT25DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 100ELT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100ELT25 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 1 |
| Propagation Delay | 4.1 ns |
| Turn On Delay Time | 4.1 ns |
| Logic Function | Translator |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Negative Supply Voltage-Nom | -5V |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | ECL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100ELT25DT Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it.Packaged in the way of Tube.Level translators uses Non-Inverted as the output.Its translator type is Mixed Signal.This electronic part is mounted in the way of Surface Mount.Unidirectional is the Channel type of this electrical device.Operation is performed at -40°C~85°C TA.0 terminations are used to end transmission lines.A series of related parts can be derived from the base part number 100ELT25.In order to power the device, a voltage supply of 5V is required.A total of 8 pins are included.There is one device in the 100ELT series, and it belongs to that series.Level translators is designed wLevel translatorsh 8 pins.The design of this electronic part is based on 1 bits.Supports a voltage of 5.5V as its maximum supply voltage.A voltage of 4.5V is the minimum supply voltage required for it to operate.The mount method is Surface Mount.1 channels are available.In order to achieve high efficiency, the supply voltage should be kept at 5V.
MC100ELT25DT Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
100ELT series
8 pins
MC100ELT25DT Applications
There are a lot of ON Semiconductor MC100ELT25DT voltage translators & level shifters applications.
- Motor Drives
- Available in Military (–55°C/125°C) Temperature Range
- Telematics
- Infotainment Head Unit
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Available in Military (-55°C to 125°C)
- I2C
- One Fabrication Site
- Controlled Baseline
- Monitors
