MC100EP140DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Phase Frequency Detector |
| Terminal Finish | Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC100EP140 |
| Output | ECL |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Max Supply Current | 93mA |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Input | NECL, PECL |
| Ratio - Input:Output | 1:2 |
| PLL | No |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | No/No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP140DG Overview
It is packaged using the Tube method since it is a clock IC. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 8 terminations that can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. This clock generator receives its inputs from NECL, PECL, which is designed to be the clock source. To access the full performance of the electronic component, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. Clock generator ic works with 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with ECL logic levels. Phase Frequency Detector is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number MC100EP140 can be found below. It is possible to connect to the PLL via 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock generator can also be included into PLL or Frequency Synthesis Circuits. This clock generator is a member of 100EP series. Clock PLL is facilitated with 2 signal outputs to magnify output frequency as high as possible. By operating at a frequency of 2GHz, frequency generator is able to achieve high efficiency. This frequency synthesizer operates at a maximum current of 93mA.
MC100EP140DG Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
MC100EP140DG Applications
There are a lot of ON Semiconductor MC100EP140DG Clock Generators applications.
- DVD add-on cards for multimedia PCs
- Jitter reduction
- Automatic control system test
- Frequency synthesis
- Digital HDTV systems
- FSK demodulators
- FPGA and processor clocks
- Signal generator
- Fiber Channel
- Various decoding circuits
