MC100EP32DTR2G
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP32 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 480 ps |
| Turn On Delay Time | 480 ps |
| Reset | Asynchronous |
| Number of Inputs | 2 |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 40mA |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
MC100EP32DTR2G Overview
A device of this type is supplied in a package of type [0]. There are 8terminations used for configuring it. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. There are wires connecting 1elements. There are 8pins on all components. It is packaged in the way of Tape & Reel (TR). In the circuit, 8pins are used to connect other components. It is mounted in the way of [0]. The 100EPseries is well suited to a number of uses. It is assumed that the logic type is [0]. It is recommended that the operating temperature be set to -40°C~85°C. Using a Surface Mountmounting type, it is mounted. In the presence of the supply voltage of [0], it can operate more reliably. Based on Pbfree code, this may result in yes. When it comes to this electronic device, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V are much important features. There are more related parts under the 100EP32base part number. The voltage source generates -4.5Vvoltage. There is 3V minimum supply voltage (Vsup) for this device. It operates with the frequency of 4GHz. It is possible to provide a voltage up to 5.5V (Vsup). This electronic component is from the Prescaler/Multivibrators family. 1inputs are configured for data/clock. A total of 2outputs have been received by the system.
MC100EP32DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
Frequency of 4GHz
MC100EP32DTR2G Applications
There are a lot of ON Semiconductor MC100EP32DTR2G Counters & Dividers applications.
- Binary counter/decoder
- Divide-by-N counting
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Communications Digital Frequency Synthesizers;
- Control counters
- Dual Up Counters
- Counter control/timers
- Frequency dividing circuits
- Time Out Timer for Consumer-Application Industrial Controls
- Digital multiplexing and demultiplexing
