MC100LVEP34DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100LVEP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Rated DC | 40V |
| Technology | ECL |
| Voltage - Supply | 2.375V~3.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 10mA |
| Frequency | 2.8GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC100LVEP34 |
| Output | ECL |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 52mA |
| Max Supply Current | 62mA |
| Logic Function | Clock |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Input | CML, LVDS, NECL, PECL |
| Ratio - Input:Output | 1:3 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Prop. Delay@Nom-Sup | 0.85 ns |
| Propagation Delay (tpd) | 0.8 ns |
| Max Duty Cycle | 50 % |
| Input Current | 500nA |
| Divider/Multiplier | Yes/No |
| fmax-Min | 2800 MHz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100LVEP34DTG Overview
As a clock IC, PLLs is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 16 terminations found in this file. This electronic frequency generator requires a voltage of 2.5V. There is a Clock PLL called CML, LVDS, NECL, PECL which is designed to be the input to this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 2.375V~3.8V supply voltages provided, clock generator ic should work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The RF synthesizer is compatible with ECL logic levels. This electronic component is usually classified as a Clock Generator component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number MC100LVEP34 can be found below. Clock generator is designed with 16 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. An electronic part belonging to the 100LVEP series is being used here. Clock PLL is configured with 3 output. When operated at 2.8GHz, frequency synthesizer achieves high efficiency. A supply current of 52mA needs to be provided to fully play RF synthesizer's function. This clock generator operation can supply up to 62mA of current. Input data is processed by combining clock logic function Clock.
MC100LVEP34DTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
MC100LVEP34DTG Applications
There are a lot of ON Semiconductor MC100LVEP34DTG Clock Generators applications.
- Modems
- Walkie-talkies
- Infotainment systems
- Televisions
- PCI express cards
- High-speed optical transport network (OTN)
- Electronic equipment
- Ports
- Multi-function printers
- Small signal recovery
