MC10E163FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E163 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Number of Circuits | 8 |
| Number of Bits | 2 |
| Propagation Delay | 900 ps |
| Family | 10E |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E163FN Overview
In order to save board space, digital switch is located in the 28-LCC (J-Lead).The package is packaged in the manner of Tube.The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.If the operating temperature is maintained at 0°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a ±4.2V~5.7V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 10E series, which provide extensive application potential.The basic configuration of this system includes 28 terminations.To find signal switch's related components, a base part number of 10E163 may also be used.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 28 can be found on this turn signal switch.Conductors terminate at J BEND in this design.The supply type of this multiplexer ic is Dual.With 28 pins, it is configured.It is positioned in the direction of Surface Mount.There is a family of 10E members.As a result, signal multiplexer provides 2 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.As a result, the turn signal switch consists of 1 outputs.Normally, the digitalswitch consists of 8 circuits.
MC10E163FN Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
MC10E163FN Applications
There are a lot of ON Semiconductor MC10E163FN Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Communication system
- Automatic health monitoring systems
- Injectors
- Telephone network
- D/A converters
- Transmission from the computer system of a satellite
- Idle motor
- Enabling different rows of memory depending on address in memory chips
- Metal detectors
