MC10EL33DTR2G
| Parameters | |
|---|---|
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.7V |
| Number of Elements | 1 |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Nominal Supply Current | 33mA |
| Reset | Asynchronous |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Count Rate | 4.2GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
MC10EL33DTR2G Overview
A device of this type is supplied in a package of type [0]. For its configuration, 8terminations are used. The supply voltage of 5V enables it operate in a fully flexible way. The 1elements are connected by wires. There are 8pins on all components. Tape & Reel (TR)is used to package it. In the circuit, there are 8pins that connect other parts. The way of Surface Mount is used to mount it. As a member of the 10ELseries, it is ideal for a wide range of applications. The logic type of Divide-by-4 is adopted. -40°C~85°Cshould be the operating temperature. It adopts a mounting type of Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Using the Pbfree code, the result may be yes. A major feature of this electronic device is its [0]. Under its base part number of [0], you will find additional related parts. As a result of the voltage source, there is -5.2V voltage. For the device to operate, a voltage supply of 5.7Vis required. It is possible to supply the device with the minimum supply voltage (Vsup) of 4.2V. It is part of the Prescaler/Multivibratorsfamily of electronic components. Currently, it is configured with 1clock/data inputs.
MC10EL33DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5.7V
MC10EL33DTR2G Applications
There are a lot of ON Semiconductor MC10EL33DTR2G Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- counting/frequency sy nthesizers-BCD output
- Fixed or Programmable Frequency Division
- Divide-by-N counting
- Up Counters
- Timers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Dual Up Counters
- ANALOG SIGNAL PROCESSING
- POWER COMPUTATION
