MC10H131FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 10H |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.9V~-5.46V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10H131 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 250MHz |
| Propagation Delay | 1.7 ns |
| Turn On Delay Time | 1 ns |
| Family | 10H |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 56mA |
| Output Characteristics | OPEN-EMITTER |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10H131FNR2 Overview
20-LCC (J-Lead)is the packaging method. It is included in the package Tape & Reel (TR). There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -4.9V~-5.46V volts. Currently, the operating temperature is 0°C~75°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 10Hseries of FPGAs. In order for it to function properly, its output frequency should not exceed 250MHz. As a result, it consumes 56mA of quiescent current without being affected by external factors. Terminations are 20. D latch belongs to the 10H131 family. Devices in the 10Hfamily are electronic devices. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Using 2 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It is set to 50mAfor the high level output current. Low level output current is set to 50mA.
MC10H131FNR2 Features
Tape & Reel (TR) package
10H series
20 pins
MC10H131FNR2 Applications
There are a lot of ON Semiconductor MC10H131FNR2 Flip Flops applications.
- Patented noise
- Computing
- Latch-up performance
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- EMI reduction circuitry
- QML qualified product
- Cold spare funcion
- Supports Live Insertion
- Consumer
