MC33151D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 560mW |
| Technology | BIPOLAR |
| Voltage - Supply | 6.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC33151 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 10.5mA |
| Input Type | Inverting |
| Rise Time | 31ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 31ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.6V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33151D Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is used.This device is equipped with 2 drivers for its configuration.Its recommended mounting way is Surface Mount.When the supply voltage is set to 6.5V~18V, it can demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.A type of Inverting is used for input in this program.8 terminations constitute its foundation.There are various related parts under its base part number MC33151.The device is mounted using Surface Mount.The pins are configured with 8 when designing the chip.This device operates with 12V supply voltage.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.This device has a maximum power dissipation of 560mW, indicating that it is capable of reducing power loss without overheating.
MC33151D Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 560mW
MC33151D Applications
There are a lot of ON Semiconductor MC33151D gate drivers applications.
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
- Dual-Battery Systems
- High power buffers
- Isolated switch mode power supplies (SMPS)
- 3-Phase Motor Inverter Driver
- RGB applications
- Isolated Gate Driver Supplies
