MC33298DWR2
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 24 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES A SUPPLY OF 9 V TO 26.5 V |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/16V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Number of Bits | 8 |
| Voltage - Output | 65V |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 15 μs |
| Output Peak Current Limit-Nom | 6A |
| Turn Off Time | 15 μs |
| Built-in Protections | THERMAL; OVER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 15.395mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33298DWR2 Overview
Package SOIC includes it.It's?packaged?in?the?form?of?a?Tape & Reel (TR).There are a total of 24 terminations on it.A device's terminal position is DUAL.There are a total of 24 pins on it.An efficient supply voltage is possible with 5V.This device uses 24 pins for operation.Peripheral Drivers contains this gadget all by itself.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 150°C°C.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.For normal operation, Vsup should be maintained above 4.5V.Hot-swappable device is set to 5.5V for the maximum supply voltage.Hot-swappable device is 59/16V type power supplies that are used in this part.In order to meet the operation criteria, the maximum output current must be reduced to 1A.Using this device, ALSO REQUIRES A SUPPLY OF 9 V TO 26.5 V can also be produced.
MC33298DWR2 Features
The terminal position of 24
MC33298DWR2 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33298DWR2 hot swap controllers applications.
- Base station power distribution system
- Load transient protection
- Networking
- Disconnect faulty loads before supply voltage drops
- Central office switching systems
- Industrial
- Continuous monitoring of device temperature
- Current limit and current foldback limit functions
- Comprehensive analog and digital capabilities
- Redundant-array-of-independent-disk (RAID) storage
