MC33879APEKR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-BSSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC33879 |
| JESD-30 Code | R-PDSO-G32 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3.1V |
| Interface | SPI |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.1V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:4 |
| Voltage - Load | 5.5V~27.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Voltage |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 750m Ω |
| Turn Off Time | 100 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MC33879APEKR2 Overview
The package is in the form of a Tape & Reel (TR).In the 32-BSSOP (0.295, 7.50mm Width) Exposed Pad package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~125°C TA for reliable performance.There are 8 outputs available on this lighting driver.The LED driving board operates with a supply voltage of 3.1V~5.5V.Voltage output is N-Channel volts at maximum.It comes under the family of MC33879.In total, there are 32 terminations.It consists of 1 functions.This lighting driver is capable of delivering a maximum output of 600mA volts.The supply voltage of 5V is conducive to high efficiency.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3.1V.It has a power supply of 3.3/5V.
MC33879APEKR2 Features
Supplied from 5V
MC33879APEKR2 Applications
There are a lot of NXP USA Inc. MC33879APEKR2 Power Switches ICs applications.
- Low Voltage I/O System Power
- Telecom and Network Systems
- Portable/Handheld Devices
- PDAs
- Hot Swap
- Storage (HDDs, SSDs)
- USB Protection
- USB Power Distribution
- Portable Music Players
- Hot Swaps
