MC74AC373DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 7.5ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC373DWR2G Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). This package has the format of Tape & Reel (TR). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 2V~6V. During operation, the temperature is set at -40°C~85°C TA. An FPGA in this series belongs to the 74AC family. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. This type belongs to the 74AC373 family. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. It is a member of the AC family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports that can be connected to it. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 6V. It is recommended that the supply voltage (Vsup) be greater than 2V. An electronic circuit can be found on 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 3 output lines.
MC74AC373DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
MC74AC373DWR2G Applications
There are a lot of ON Semiconductor MC74AC373DWR2G Latches applications.
- Shift right register
- Parallel data storage
- Counters
- Automotive Body Electronics
- Sample and hold register
- Clocks
- Automotive Infotainment
- Lamp and Display (LED)
- Motor Drives
- Parallel-to-Serial Data Conversion
