MC74AC377DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC377DTG Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 140MHz. A total of 1 elements are present. Despite external influences, it consumes 8μAof quiescent current. A total of 20 terminations have been made. Members of the 74AC377family make up this object. Power is supplied from a voltage of 5V volts. A 4.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as AC. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in this flip flop. As soon as Vsup reaches 6V, the maximum supply voltage is reached. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. This D flip flop is well suited for RAIL based on its reliable performance. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
MC74AC377DTG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC377DTG Applications
There are a lot of ON Semiconductor MC74AC377DTG Flip Flops applications.
- Matched Rise and Fall
- Asynchronous counter
- 2 – Bit synchronous counter
- Synchronous counter
- Computers
- Control circuits
- Shift registers
- Individual Asynchronous Resets
- ESD performance
- Guaranteed simultaneous switching noise level
