MC74AC74DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 11 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 16 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC74DR2G Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. Differentialis the output configured for it. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 160MHz. A total of 14 terminations have been made. D latch belongs to the 74AC74 family. The power source is powered by 5V. The input capacitance of this JK flip flopis 4.5pF farads. The electronic device belongs to the ACfamily. It is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V. 2 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TR. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 24mA, it is possible to design the device in any way you want. To operate, the chip has a total of 1 output lines. There is 4μA quiescent current consumption by it.
MC74AC74DR2G Features
Tape & Reel (TR) package
74AC series
14 pins
MC74AC74DR2G Applications
There are a lot of ON Semiconductor MC74AC74DR2G Flip Flops applications.
- Synchronous counter
- Data transfer
- QML qualified product
- Circuit Design
- ESCC
- Frequency division
- Divide a clock signal by 2 or 4
- Clock pulse
- EMI reduction circuitry
- Reduced system switching noise
