MC74ACT138DTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | 3 ENABLE INPUTS |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT138 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 3:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | INVERTED |
| Max I(ol) | 0.024 A |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
MC74ACT138DTR2 Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers from 74ACT series can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number 74ACT138 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 16 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.The logic switch belongs to the family of ACT.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.The switches package is packaged in accordance with the TAPE AND REEL method.In addition, 3 ENABLE INPUTS provides improved characteristics.
MC74ACT138DTR2 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Power supplies of 5V
3 ENABLE INPUTS
MC74ACT138DTR2 Applications
There are a lot of ON Semiconductor MC74ACT138DTR2 Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Enabling block of memory depending on address in memory chips
- Steel plants
- Speed synchronization of multiple motors in industries
- To select different task for memory in microprocessor memory systems
- Signal router
- Encrypted communications system
- War field flying robot with a night vision flying camera
- HD surveillance system
- Electronic circuits
