MC74ACT139MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 11 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 11 ns |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT139MELG Overview
Providing this information in the 16-SOIC (0.209, 5.30mm Width) enables digital switch board space to be saved.It is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers in the 74ACT series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.The part number for 74ACT139 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.Among the family of ACT the logic switch is a member.mux switch's normal operation requires the power supply of 5V.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.In the absence of external influences, it consumes 8μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches is packaged according to the way of TAPE AND REEL.As a voltage level input, the multiplexers have 1 lines.Signal source consists of 4 output lines.
MC74ACT139MELG Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
1 input lines
4 output lines
MC74ACT139MELG Applications
There are a lot of ON Semiconductor MC74ACT139MELG Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Robotic vehicles
- Code conversion
- Microprocessor input/output systems
- Steel plants
- Audio transmission
- Microprocessor memory systems
- Idle motor
- Electronically controlled engine system
- Electronics industry
