MC74ACT373DWG
| Parameters | |
|---|---|
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
MC74ACT373DWG Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tube is the way it is packaged. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C TA. The 74ACT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. 74ACT373 is its family. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. ACT is the family of this electronic device. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. Subcategory FF/Latches contains this part. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. High efficiency requires maintaining the supply voltage at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Without external influences, it consumes 8μA quiescent current.
MC74ACT373DWG Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373DWG Applications
There are a lot of ON Semiconductor MC74ACT373DWG Latches applications.
- Frequency dividing
- Counting
- Stacked or Push-Down Registers
- Parallel-to-Serial Data Conversion
- Up-Down Johnson
- Hammer
- Ring counter
- Automotive Infotainment
- Hammer Device Information
- Automotive HEV/EV Powertrain
