MC74ACT373DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT373DWR2G Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. The voltage supply is 4.5V~5.5V. It is -40°C~85°C TA at the operating temperature. This FPGA is part of the 74ACT series. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. It belongs to 74ACT373 family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. This electronic device is categorized as a ACT electronic device. This board has 20 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. The device is powered by 5V power supplies. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is appropriate for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design. The supply voltage should be maintained at 5V for high efficiency. 3 output lines provide binary equivalents of input lines.
MC74ACT373DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373DWR2G Applications
There are a lot of ON Semiconductor MC74ACT373DWR2G Latches applications.
- Relay
- Audio and video switching
- Shift Registers
- General-Purpose Register
- Programmable binary
- Parallel Output
- Synchronous frequency dividers
- Network Switches
- Avionics
- Pseudo-random code generators
