MC74HC273ADWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC273 |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 145 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 25 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 8 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC273ADWG Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. The operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. A total of 20terminations have been recorded. The 74HC273 family contains this object. The power source is powered by 3V. The input capacitance of this JK flip flopis 10pF farads. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. Vsup reaches 6V, the maximal supply voltage. Normally, the supply voltage (Vsup) should be kept above 2V. In light of its reliable performance, this T flip flop is well suited for RAIL. It operates from 2/6V power supplies. With a current output of 7.8mA , it offers maximum design flexibility. There are no output lines on the JK flip flop. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 8 channels are available.
MC74HC273ADWG Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
MC74HC273ADWG Applications
There are a lot of ON Semiconductor MC74HC273ADWG Flip Flops applications.
- Counters
- Parallel data storage
- Single Up Count-Control Line
- Differential Individual
- Patented noise
- Bounce elimination switch
- Memory
- Individual Asynchronous Resets
- Supports Live Insertion
- Synchronous counter
