MC74HC4051ADG

100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-MC74HC4051ADG
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 632
Description: 100Ohm Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74HC4051A
Pin Count	16
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Nominal Supply Current	80μA
Power Dissipation	500mW
Propagation Delay	40 ns
Turn On Delay Time	245 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Halogen Free	Halogen Free
Supply Type	Dual, Single
Bandwidth	80MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	130pF
On-state Resistance Match-Nom	18Ohm
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	76ns
Signal Current-Max	0.025A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm

MC74HC4051ADG Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Use MC74HC4051A to search for variants of the digital switches. It has an internal resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 40μA would be sufficient for this switch device. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using a dual power supply, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating 8 inputs is required. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.