Parameters |
Supply Current-Max (Isup) |
0.08mA |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
50pF |
On-state Resistance Match-Nom |
12Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.025A |
Height Seated (Max) |
1.2mm |
Length |
5mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74HC4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Propagation Delay |
40 ns |
Turn On Delay Time |
245 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
120MHz |
MC74HC4053ADTR2 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -55°C~125°C TA. There are 16 terminations totally. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. It is injected into the electrical part body with 16 pins. A SPDT switching circuit is used to build these analog multiplexers. There are 3 circuits in this multiplexer. Use 74HC4053 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage the electrical component should receive. This multiplexer would work with 40μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. The voltage should be at least 1V if you are using dual power supplies. A 6 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.
MC74HC4053ADTR2 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 120MHz
MC74HC4053ADTR2 Applications
There are a lot of ON Semiconductor MC74HC4053ADTR2 Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- High speed data transmission line cards
- Signal routing between systems
- Ultrasound
- Communication systems
- PDH Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Frame Relay Equipment
- Isolation
- Digital access cross connects