MC74HC4067ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Resistance | 140Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Base Part Number | MC74HC4067A |
| Pin Count | 24 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SPST |
| Operating Supply Current | 4μA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 415 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 4 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 415 ns |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 140Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 23ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC4067ADWR2G Overview
The electrical component comes in 24-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 16:1. Operational temperature extended around -55°C~125°C TA. In total, there are 24 terminations. A electrical component with 1 channels is capable of high-quality output. A 4.5V voltage supply should turn on and run the electronic component. A total of 24 pins are injected into the electrical part body. A SP4T switching circuit is used to build these analog multiplexers. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with MC74HC4067A if you are looking for variants. In this multiplexer, the internal resistance is 140Ohm. Datasheets for functions of 24 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 4μA current. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. A SPST analog IC is integrated into the board. In order to operate the 4 inputs, there are several steps to follow.
MC74HC4067ADWR2G Features
1 Channels
Switch Circuit: SP4T
4μA Supply Current
-3db Bandwidth: 90MHz
MC74HC4067ADWR2G Applications
There are a lot of ON Semiconductor MC74HC4067ADWR2G Analog Switches & Multiplexers ICs applications.
- FTTH
- Avionics test equipment
- Remote wireless modules
- Communication systems
- Switching Systems
- Communication systems
- Industrial and process control systems
- MP3 players
- Relay replacements
- SONET
