MC74LCX374MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LCX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LCX16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74LCX374MELG Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74LCXseries contain this type of chip. This D flip flop should not have a frequency greater than 150MHz. There are 1 elements in it. It consumes 10μA of quiescent 20terminations have occurred. The object belongs to the 74LCX16374 family. An input voltage of 3.3Vpowers the D latch. There is 7pF input capacitance for this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility is achieved through the use of 8 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. For high efficiency, the supply voltage should be kept at 3.3V. In order for the chip to function, it has 3output lines.
MC74LCX374MELG Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX374MELG Applications
There are a lot of ON Semiconductor MC74LCX374MELG Flip Flops applications.
- Load Control
- Synchronous counter
- Instrumentation
- ATE
- Memory
- Differential Individual
- Digital electronics systems
- Pattern generators
- CMOS Process
- Asynchronous counter
