MC74LVX157DTR2
| Parameters | |
|---|---|
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
| Propagation Delay | 11.4 ns |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
MC74LVX157DTR2 Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 2V~3.6V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74LVX series, these multiplexers have a wide range of applications.There are 16 terminations included in its basic configuration.Its logic switch base part number is 74LVX157 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.7V is supplied.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.Surface Mount is the way it is mounted.The logic switch belongs to the family of LV/LV-A/LVX/H.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In order for 3.3V to operate normally, a power supply is provided.There are 1 outputs designed for the operation of the turn signal switch.In accordance with TAPE AND REEL, switches can be packaged.In order to accept voltage levels, the multiplexers have input lines 2 on the board.
MC74LVX157DTR2 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
MC74LVX157DTR2 Applications
There are a lot of ON Semiconductor MC74LVX157DTR2 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Data communication
- HD surveillance system
- Microprocessor memory systems
- Data distribution
- Enabling different rows of memory depending on address in memory chips
- Enabling different functions units in microprocessor instruction decoding
- Time division multiplexing system
- Electronically controlled engine system
- HDMI applications
