MC74LVX374MELG
| Parameters | |
|---|---|
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 19.8 ns |
| Turn On Delay Time | 6.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 14.1ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 55000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MC74LVX374MELG Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. A 2V~3.6Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74LVXseries comprises this type of FPGA. A frequency of 95MHzshould not be exceeded by its output. The element count is 1 . It consumes 4μA of quiescent There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74LVX374. The power supply voltage is 2.7V. This T flip flop has a capacitance of 4pF farads at the input. In terms of electronic devices, this device belongs to the LV/LV-A/LVX/Hfamily of devices. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. The flip flop is designed with 8bits. For normal operation, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 3 output lines.
MC74LVX374MELG Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
MC74LVX374MELG Applications
There are a lot of ON Semiconductor MC74LVX374MELG Flip Flops applications.
- Storage Registers
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Digital electronics systems
- Matched Rise and Fall
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- Data transfer
- Buffered Clock
- Registers
