MC74LVX574MG
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Qualification Status | Not Qualified |
MC74LVX574MG Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. It is included in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74LVXseries comprises this type of FPGA. You should not exceed 75MHzin its output frequency. A total of 1 elements are present. It consumes 4μA of quiescent A total of 20 terminations have been made. If you search by 74LVX574, you will find similar parts. The power supply voltage is 2.7V. A JK flip flop with a 4pFfarad input capacitance is used here. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 20pins on it. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. The supply voltage (Vsup) should be kept above 2V for normal operation. The superior flexibility is achieved through the use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for RAIL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 3 output lines in this JK flip flop.
MC74LVX574MG Features
Tube package
74LVX series
20 pins
8 Bits
MC74LVX574MG Applications
There are a lot of ON Semiconductor MC74LVX574MG Flip Flops applications.
- Balanced 24 mA output drivers
- High Performance Logic for test systems
- 2 – Bit synchronous counter
- Synchronous counter
- Frequency Divider circuits
- Shift Registers
- Automotive
- Latch
- Functionally equivalent to the MC10/100EL29
- Reduced system switching noise
