Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
55Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MC74LVXT4052 |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
6V |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Number of Channels |
4 |
Number of Circuits |
2 |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
40μA |
Propagation Delay |
23 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Voltage - Supply, Single/Dual (±) |
2.5V~6V ±2.5V~6V |
Supply Type |
Dual |
Bandwidth |
80MHz |
Supply Current-Max (Isup) |
0.16mA |
Neg Supply Voltage-Nom (Vsup) |
-3V |
Turn-Off Delay Time |
40 ns |
On-State Resistance (Max) |
26Ohm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Charge Injection |
12pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Switching |
BREAK-BEFORE-MAKE |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74LVXT4052DTR2 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 4:1. Extended operating temperature around -55°C~125°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. SP4T switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with MC74LVXT4052. This digital multiplexer has 55Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Analog switch ics with Dual supply type are cost-effective. This digital switch can be operated with a current of 40μA. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. There is a voltage range of 6V operating voltages for the electrical part. 80MHz bandwidths enable data to be transferred.
MC74LVXT4052DTR2 Features
4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 80MHz
MC74LVXT4052DTR2 Applications
There are a lot of ON Semiconductor MC74LVXT4052DTR2 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Audio signal routing
- SDH
- SONET
- Avionics
- Relay Replacement
- Avionics and Military Systems
- Mechanical reed relay replacement
- E1 Multiplexer
- Multi-Line E1 Interface Cards