MCP112T-240E/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP112 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.285V |
| Max Reset Threshold Voltage | 2.355V |
| Threshold Voltage | +2.32V |
| Undervoltage Threshold | 2.285V |
| Overvoltage Threshold | 2.355V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP112T-240E/TT Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 3 pins on IC management. This power management system has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. A maximum supply temperature of 1.75μA can be used.
MCP112T-240E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-240E/TT Applications
There are a lot of Microchip Technology MCP112T-240E/TT Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Leakage protection
- Rechargeable batteries
- Battery-powered equipment
- Magnetic resonance imaging
- Dash board
- Detection of phase imbalance
- Functional modules
- Low voltage/high power - AI, GPU
- Electrical fire monitoring system
