MCP1406-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1406 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Output Current | 6A |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1406-E/MF Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.A package of Tube has been used.Configuration is based on 1 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.Temperature range -40°C~125°C TA is allowed for this device.Input type of Inverting is used.Mosfet driver is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1406.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 6A.Several electronic components are included in its subcategory of MOSFET Drivers.The board has a total of 8 component pins.The device is capable of delivering a current of 6A.For higher stability, the supply current should be kept at 250μA.
MCP1406-E/MF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1406-E/MF Applications
There are a lot of Microchip Technology MCP1406-E/MF gate drivers applications.
- Refrigerator
- DC/DC converters
- Motor controllers
- Solar power supplies
- Isolated Supplies for controller area network (CAN),
- Smart Phones
- serial peripheral interface (SPI), I2C
- High-speed communications
- Pulse transformer drivers
- White Goods - Air Conditioner, Washing Machine,
