MCP14628-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14628 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Output Current | 2A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Input Bias Current | 250μA |
| Turn On Time | 0.03 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 2V |
| High Side Voltage - Max (Bootstrap) | 36V |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14628-E/SN Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is used.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 4.5V~5.5V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.The base part number MCP14628 refers to a number of related parts.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 8 pins.A voltage of 5V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.The maximum output current can amount to 2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board contains 8 pins for component connections.Ideally, the high-side voltage should not exceed 36V.Based on its basis, it integrates 2 outputs.The output current supported by the device is 2A.Using its power supply of 5V, it provides solutions to diverse power supply problems.Mosfet gate drivers is recommended that 5V be set as the operating supply voltage.
MCP14628-E/SN Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14628-E/SN Applications
There are a lot of Microchip Technology MCP14628-E/SN gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- A/D drivers
- Video amplifiers
- Head-up and Head mounted displays
- Uninterruptible Power Supplies (UPS)
- Industrial Modules
- Pulse transformer drivers
- Isolated switch mode power supplies (SMPS)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
