MCP1602-250I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1602 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Output Voltage | 2.5V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP1602-250I/MS Overview
A Tube package is used in this voltage regulator to optimize performance. In this voltage regulator, there are a total of 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on this voltage regulator 12v. Fixed outputs are generated on the output pins of this adjusting voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. The switching frequency of this DC-DC switching regulator reaches 2MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.7V. DC DC switching regulator's 500mA output current allows for maximum design flexibility. Voltage regulator has a maximum input voltage of 5.5V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. DC/DC regulators such as this one belong to the MCP1602 family of products. A voltage of 2.5V volts can be produced by voltage regulator. During switching regulator operation, 8 pins are used. In addition to adding efficiency and stability to the harley voltage regulator, the IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION feature brings even greater benefits.
MCP1602-250I/MS Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
IT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
MCP1602-250I/MS Applications
There are a lot of Microchip Technology MCP1602-250I/MS Voltage Regulators applications.
- Industrial robots
- Serial communication converter
- Current source circuits
- Lathes
- Constant current circuits
- Hydraulic presses
- Sensitive electronic devices
- Medical monitoring systems
- Scientific testing
- Plate bending machines
