banner_page

MCP3903-E/SS

24 Bit AFE MCP3903 28-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP3903-E/SS
  • Package: 28-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 604
  • Description: 24 Bit AFE MCP3903 28-SSOP (0.209, 5.30mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case 28-SSOP (0.209, 5.30mm Width)
Number of Pins 28
Packaging Tube
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 125°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Subcategory Other Converters
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP3903
Pin Count 28
Operating Supply Voltage 3.6V
Power Supplies 3/3.35V
Temperature Grade AUTOMOTIVE
Number of Channels 6
Interface SPI, Serial
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Operating Supply Current 12.3mA
Nominal Supply Current 7.1mA
Number of Bits 24
Converter Type D/A CONVERTER
Reference Voltage 2.35V
Resolution 3 B
Sampling Rate 64 ksps
Voltage - Supply, Analog 5V
Voltage - Supply, Digital 2.7V~3.6V
Number of Analog In Channels 6
Output Bit Code OFFSET BINARY
Conversion Rate 64 ksps
Analog Input Voltage-Max 1V
Signal to Noise Ratio (SNR) 91.5 dB
Height 1.8542mm
Length 10.4902mm
Width 5.588mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP3903-E/SS Overview


28-SSOP (0.209, 5.30mm Width) is the way it is packaged.In this electronic part, 24 Bits have been used.As part of the Tube package, it is embedded.It is the practice of terminating transmission lines with impedance-matching devices.The supply/analog voltage of this electrical device is 5V, which converts alternative voltage (AC voltage) into regulated direct voltage (DC voltage) to drive a load with regulated DC power.The supply/digital voltage of this electrical device is 2.7V~3.6V.Based on the base part number, it will be possible for the related parts to be located.In terms of its design, it has 28 pins.To ensure its reliability, it is designed to operate at the minimum temperature of -40°C when operating.For reliability, it operates at 125°C, its maximal operating temperature.There is a 28 pin count that is included in this device.As a result, it supports the maximum supply voltage of 5.5V.This device reaches its maximum operating voltage when it is supplied with a voltage of 2.7V.There is a mounting on the Surface Mount-axis side of it.The efficiency of the power supply will be high if a constant supply voltage of 3.6V is maintained.Using a supply current of 12.3mA, this DC switching regulator operates on a DC voltage.In Other Converters, you will find this part.7.1mA is the nominal supply current that is being supplied.Power is provided by a 3/3.35V-shape power supply.A/D converters have a number of channels known as 6 channels.Based on the voltage input and output voltages of the source, there are D/A CONVERTER converters that can be implemented.

MCP3903-E/SS Features



MCP3903-E/SS Applications


There are a lot of Microchip Technology MCP3903-E/SS AFE applications.

  • 4-channel data acquisition
  • Wireless local loop
  • Cell Phones
  • RADAR processing, digital oscilloscopes
  • Broadband data applications
  • Communications
  • High Speed Data Acquisition for PCs
  • AC motor control
  • GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
  • Instrumentation and test equipment

Write a review

Note: HTML is not translated!
    Bad           Good