Parameters |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP601 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5.5V |
Number of Elements |
1 |
Power Supplies |
3/5V |
Number of Circuits |
1 |
Nominal Supply Current |
230μA |
Output Current |
22mA |
Slew Rate |
2.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
75 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~6V |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
2.8MHz |
Unity Gain BW-Nom |
2800 kHz |
Voltage Gain |
115dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
700μV |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
MCP601T-I/SN Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. There is an input offset voltage of 2mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Keeping the voltage gain at 115dB is the best course of action. This op amp contains 1 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. It is used TAPE AND REEL to pack the op amps.
MCP601T-I/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP601T-I/SN Applications
There are a lot of Microchip Technology MCP601T-I/SN Instrumentational OP Amps applications.
- Power transmission
- Cinema or auditorium audio system
- Ultrasound transducers
- E-book readers
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- Active probe
- Proportional counter tubes
- ECG equipment
- Weighing systems