MCP6422-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6422 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 4.4μA |
| Nominal Supply Current | 4.4mA |
| Slew Rate | 0.05V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 90 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Supply Voltage Limit-Max | 6.5V |
| Screening Level | TS 16949 |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6422-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. Please take in mind that this instrumentation amplifier should be run at 3V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 4.4μA . Keeping the voltage gain at 115dB is the best course of action. The op amp ic has 2 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
MCP6422-E/MS Features
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6422-E/MS Applications
There are a lot of Microchip Technology MCP6422-E/MS Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Computer workstations
- Semiconductor detectors
- Non-polarized electrodes
- Communication
- single/dual op amp sum and difference circuits
- Band-pass filter
- Scintillation detectors
- Industrial control system
- Portable docking station
