MCP6541-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP6541 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 85 °C/W |
| Height | 5.33mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541-I/P Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.As a result, it is designed with Tube package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.As a result, it contains 8 pins.The recommended mounting type is Through Hole .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.Try search MCP6541 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 1μA in this comparator.There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.Input current to the device cannot exceed 1pA .
MCP6541-I/P Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6541-I/P Applications
There are a lot of Microchip Technology MCP6541-I/P linear comparators applications.
- Battery-Powered Electronics
- Body Control Modules
- Point of load regulators
- Infotainment and Clusters
- High-Speed Sampling Circuits
- Power management
- Mobile Phones and Tablets
- Wireless Base Stations
- General-Purpose Portable Devices
- Wide Range VCO; MOS Clock Timers
