Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6541 |
Pin Count |
5 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
1 |
Nominal Supply Current |
1mA |
Output Current |
2mA |
Max Supply Current |
1mA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Natural Thermal Resistance |
256 °C/W |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6541T-I/OT Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The part is shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator is possible to classify the chip as General Purpose .The total number of elements is 1 .The device contains 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.Search MCP6541 to find more pin-to-pin solutions.The comparator displays a quiescent current of 1μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP6541T-I/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6541T-I/OT Applications
There are a lot of Microchip Technology MCP6541T-I/OT linear comparators applications.
- Point of load regulators
- High-Speed Differential Line Receiver
- System control and monitoring
- Portable and Battery-Powered Systems
- Motor drives
- Notebooks and PDAs
- Ultra-Low Power Systems
- Handheld Instruments
- Window Comparators
- Portable Battery Monitoring