MCP6546-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 600nA |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546-E/MS Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .As a result, it is designed with Tube package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6546 .As a result, this comparator displays a quiescent current of 1μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 600nA .A maximum current of 1pA can be supplied to the device.
MCP6546-E/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6546-E/MS Applications
There are a lot of Microchip Technology MCP6546-E/MS linear comparators applications.
- Portable Battery Monitoring
- Factory automation & control
- Mobile Phones and Tablets
- Notebooks and PDAs
- Window Comparators
- Handheld Instruments
- Pulse, Squarewave, and Time Delay Generators
- Power management
- Battery management and protection
- General-Purpose, Low-Voltage Applications
