MCP6546T-I/LT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546T-I/LT Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a CMOS, Open-Drain, Rail-to-Rail, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 1 elements in it.Electronic comparator has 5 pins.The recommended mounting method is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.Electronic comparator has 5 pins.You can find more pin-to-pin solutions for your special requirements by searching MCP6546 .This comparator presents a quiescent current of 1μA .A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 1μA .A supply current exceeding 1μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 1pA .
MCP6546T-I/LT Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546T-I/LT Applications
There are a lot of Microchip Technology MCP6546T-I/LT linear comparators applications.
- Battery-Powered Electronics
- Automatic Test Equipment
- Automotive
- Alarm and Monitoring Circuits
- Lithium ion battery monitoring
- Current and voltage sensing
- Handheld Instruments
- Notebooks and PDAs
- General Purpose Low Voltage Applications
- General-Purpose, Low-Voltage Applications
