MCP6548-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6548 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MCP6548-I/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .The part will be shipped by Tube .There are8 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as General Purpose .This is a 1 element comparator.As a result, it contains 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has 8 pins.Search MCP6548 to find more pin-to-pin solutions.The comparator displays a quiescent current of 1μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 1μA in order to use the device normally.Current supply exceeding 1μA could cause disfunction of the compartator.You can input a maximum current of 1pA into this device.In order to operate normally, a supply voltage of 0 is required.
MCP6548-I/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6548-I/MS Applications
There are a lot of Microchip Technology MCP6548-I/MS linear comparators applications.
- Current and voltage sensing
- Analog front end
- Zero-Crossing Detectors
- Wearable Devices
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
- Set Top Boxes
- Laptop Computers
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
