MCP6548-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP6548 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MCP6548-I/P Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.There is a comparator of type CMOS, Open-Drain, Rail-to-Rail, TTL output on this device.The chip is packaged with Tube .8 terminals are found on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 1 elements.The device includes 8 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.Search MCP6548 to find more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Electronic comparator is recommended that the nominal supply current of the device be 1μA .Current supply exceeding 1μA could cause disfunction of the compartator.The operating supply voltage for normal operation should be 5V .
MCP6548-I/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6548-I/P Applications
There are a lot of Microchip Technology MCP6548-I/P linear comparators applications.
- Power management
- Industrial
- Power Supervision
- High-Speed Differential Line Receiver
- Security Detection Systems
- Mobile Phones
- Set Top Boxes
- Body Control Modules
- Ultra-Low Power Systems
- Laptop Computers
