MCP6567-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6567 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6567-E/MS Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.Output type of this comparator is CMOS, Open-Drain .This package has been designed with Tube .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 1.8V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .This element consists of 2 elements in total.The device contains 8 pins.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 8 pins on the comparator.You can search MCP6567 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 130μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 100μA .Electronic comparator is possible to input up to 1pA current into the device.
MCP6567-E/MS Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6567-E/MS Applications
There are a lot of Microchip Technology MCP6567-E/MS linear comparators applications.
- Notebooks and PDAs
- Alarm and Monitoring Circuits
- Limit Comparators
- Set Top Boxes
- Industrial
- Appliances
- Battery-Powered Electronics
- High-Speed Differential Line Receiver
- System control and monitoring
- Lithium ion battery monitoring
