MCP6569T-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6569 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Supply Current-Max | 0.13mA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP6569T-E/ST Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, Open-Drain output.The chip is packaged with Tape & Reel (TR) .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 1.8V voltage.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.As a result, it contains 14 pins.The type of mounting recommended is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 14 pins on the comparator.Try search MCP6569 to get more pin-to-pin solutions for your special needs.This comparator presents a quiescent current of 130μA .Mounting on PCBs or other boards is easy with the Surface Mount .The device can be powered by 2/5V power supplies.As a minimum current, this part can be powered by 0.13mA .
MCP6569T-E/ST Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6569T-E/ST Applications
There are a lot of Microchip Technology MCP6569T-E/ST linear comparators applications.
- RC Timers
- Handheld Instruments
- Alarm and Monitoring Circuits
- Body Control Modules
- Hand-Held Electronics
- High-Speed Sampling Circuits
- Laptop Computers
- Wireless Base Stations
- Battery management and protection
- Analog front end
