MCP665T-E/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP665 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 6mA |
| Output Current | 90mA |
| Slew Rate | 32V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Gain Bandwidth Product | 60MHz |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP665T-E/UN Overview
In order to protect the op amps, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 10h termination of the year. Linear amplifier has a total of 10 pins. This linear amplifier should be powered by an 2.5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 10 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1.8mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 6mA , this buffer op amp will be able to operate. You should keep the voltage gain at 126dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A total of 2 elements are present in this linear amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier.
MCP665T-E/UN Features
10 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP665T-E/UN Applications
There are a lot of Microchip Technology MCP665T-E/UN Instrumentational OP Amps applications.
- Power transmission
- High gain DC amplifier
- Vehicle electronics
- Video data acquisition
- Car stereo
- Automation control systems
- Communication device
- Computer workstations
- Professional videography
- Industrial applications including automation
