MCP73113-06SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 4.221V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73113 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1.1A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.221V |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 16V |
| Min Output Voltage | 4.079V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Drain to Source Resistance | 350mOhm |
| Current - Charging | Constant - Programmable |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73113-06SI/MF Overview
It is included in the Tube package for convenience.The package 10-VFDFN Exposed Pad includes a version of it.It appears that the device's mounting type is Surface Mount.A temperature setting of -40°C~85°C TA ensures reliable performance.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.To charge the device, Constant - Programmable current is required.According to the base part number MCP73113, its related parts can be found.It contains 10 terminations, so that is how many there are.There are 10 pins on it.In order for it to work, it requires 10 pins.A total of 1 channels are available.Power can be provided by a battery with 5.1V.A supply voltage of no more than 6.5V is required for the device to operate properly.It is possible to achieve optimum efficiency in the case of a given output voltage of 4.2V.It is in this instance that the device's output current is set to 1A.This device is classified as Power Management Circuits under the subcategory.It is capable of functioning at a voltage as low as possible, for example 4.2V voltage for this circuit is used.In order to mount it, it has to align itself with Surface Mount.Regarding the power supply for the part, it is set to 5V.Current is flowing through the gadget's supply at 700μA volts.18V is the maximum input voltage it can handle.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.221V.As a result of the reduction in maximum output current, the output current should be kept below 1.1A during operation.
MCP73113-06SI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73113-06SI/MF Applications
There are a lot of Microchip Technology MCP73113-06SI/MF Battery Chargers ICs applications.
- Electrical Utility industry
- Ruggedized notebooks/tablet computers
- Electric lift car
- Industrial lighting
- Golf carts
- Mobile router
- Charging cradle for wearable devices
- Opportunity charge
- GPS portable devices
- Portable medical instruments
