Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | TO-236-3, SC-59, SOT-23-3 |
Number of Pins | 3 |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Published | 2005 |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 3 |
ECCN Code | EAR99 |
Resistance | 400MOhm |
Subcategory | Peripheral Drivers |
Max Power Dissipation | 225mW |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Terminal Pitch | 0.95mm |
Current Rating | 400mA |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | MDC3105 |
Pin Count | 3 |
Number of Outputs | 1 |
Output Voltage | 6V |
Output Type | Bipolar |
Max Output Current | 500mA |
Supply Voltage-Max (Vsup) | 6V |
Power Supplies | 5V |
Supply Voltage-Min (Vsup) | 3V |
Interface | On/Off |
Nominal Supply Current | 800μA |
Output Configuration | Low Side |
Output Current | 400mA |
Voltage - Supply (Vcc/Vdd) | Not Required |
Propagation Delay | 55 μs |
Switch Type | Relay, Solenoid Driver |
Halogen Free | Halogen Free |
Output Current per Channel | 400mA |
Rise Time | 2.4μs |
Fall Time (Typ) | 45 μs |
Ratio - Input:Output | 1:1 |
Voltage - Load | 6V Max |
Driver Number of Bits | 1 |
Max Junction Temperature (Tj) | 150°C |
Built-in Protections | TRANSIENT |
Ambient Temperature Range High | 85°C |
Height | 1.11mm |
Length | 2.9mm |
Width | 1.3mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
This device is intended to replace an array of three to six discrete components with an integrated SMT part. It is available in a SOT?23 package. It can be used to switch 3 to 6 Vdc inductive loads such as relays, solenoids, incandescent lamps, and small DC motors without the need for a free?wheeling diode.
Provides a Robust Driver Interface between DC Relay Coil and
Sensitive Logic Circuits
Optimized to Switch Relays from a 3.0 V to 5.0 V Rail
Capable of Driving Relay Coils Rated up to 2.5 W at 5.0 V
Features Low Input Drive Current and Good Back?to?Front Transient
Isolation
Internal Zener Eliminates Need for Free?Wheeling Diode
Internal Zener Clamp Routes Induced Current to Ground for Quieter
System Operation
Guaranteed Off State with No Input Connection
Supports Large Systems with Minimal Off?State Leakage
ESD Resistant in Accordance with the Class 1C Human Body Model
Low Sat Voltage Reduces System Current Drain by Allowing Use of
Higher Resistance Relay Coils
Pb?Free Packages are Available
Telecom: Line Cards, Modems, Answering Machines, FAX
Machines, Feature Phone Electronic Hook Switch
Computer and Office: Photocopiers, Printers, Desktop Computers
Consumer: TVs and VCRs, Stereo Receivers, CD Players, Cassette
Recorders, TV Set-Top Boxes
Industrial: Small Appliances, White Goods, Security Systems,
Automated Test Equipment, Garage Door Openers
Automotive: 5.0 V Driven Relays, Motor Controls, Power Latches,
Lamp Drivers