MIC2007YM6TX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MIC2007 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Power Supplies | 5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.33mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 70m Ω |
| RoHS Status | ROHS3 Compliant |
MIC2007YM6TX Overview
Tape & Reel (TR) is how it's packaged.This package is included in SOT-23-6.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Load Discharge, Slew Rate Controlled features are available on the lighting driver.It comes under the family of MIC2007.There are 6 terminations in it.This LED driver has a maximum output of 2AV.The supply voltage can be 5V for high efficiency.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.In this case, the power supply is 5V.The maximum supply current for the LED driver is 0.33mA when it is operating.
MIC2007YM6TX Features
Supplied from 5V
MIC2007YM6TX Applications
There are a lot of Microchip Technology MIC2007YM6TX Power Switches ICs applications.
- USB Ports/Hubs
- Portable Video Game Players
- Storage Drives
- USB Power Distribution
- Wearable Devices
- Notebook PC
- USB Protection
- Telecom and Network Systems
- Portable Music Players
- Low Voltage I/O System Power
