MIC2025-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2025 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2025-2YMM Overview
As you can see, it's packaged in the way of a Tube.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Slew Rate Controlled, Status Flag features are available on the lighting driver.It belongs to the family MIC2025.The operation is carried out using the 8 pins.500mAV is the maximum output of the LED driver.This operation requires the maximum output current to be decreased to 500mA.In this case, it is mounted in the way of Surface Mount.90mOhm resistance is present in the lighting driver.It is included in the MM8? series.We currently have 1 channels available.As far as input voltage goes, its maximum is 5.5V volts.Input voltage must be at least 2.7V volts.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.It is possible to use a voltage as low as 2.7V V as a power supply voltage.
MIC2025-2YMM Features
Resistance of 90mOhm
1 channels
MIC2025-2YMM Applications
There are a lot of Microchip Technology MIC2025-2YMM Power Switches ICs applications.
- USB Power Distribution
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Hot Swap
- PDAs
- Notebook PC
- Hot-Swap Systems
- Hot Swaps
- Set-Top Boxes
- Portable/Handheld Devices
