banner_page

MIC2043-1YM

N-Channel PMIC MIC2043 8 Pin 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2043-1YM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 187
  • Description: N-Channel PMIC MIC2043 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Current Rating 3A
Base Part Number MIC2043
Number of Outputs 1
Output Voltage 6V
Output Type N-Channel
Max Output Current 3A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 1.6V
Current - Output (Max) 3A
Nominal Supply Current 300μA
Output Configuration High Side
Output Current 3A
Voltage - Supply (Vcc/Vdd) 1.6V~5.5V
Input Type Non-Inverting
Turn On Delay Time 1 ms
Switch Type General Purpose
Turn-Off Delay Time 5 μs
Ratio - Input:Output 1:1
Voltage - Load 1.6V~5.5V
Fault Protection Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO
Rds On (Typ) 40mOhm
Ambient Temperature Range High 85°C
Height 1.879mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tube
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Resistance 60mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C

MIC2043-1YM Overview


It is package in Tube case.This file is included in package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.It uses a supply voltage of 1.6V~5.5V to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It is a member of the MIC2043 family.During operation, the 8 pins are used.The LED driver output is limited to 3AV.This results in the maximum output current dropping to 3A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has 60mOhm resistance.This results in a 3A output current.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.If required, it can operate at 1.6V volts as well.

MIC2043-1YM Features


Resistance of 60mOhm

MIC2043-1YM Applications


There are a lot of Microchip Technology MIC2043-1YM Power Switches ICs applications.

  • Portable GPS
  • Portable Music Players
  • Portable Devices
  • Portable Video Game Players
  • Storage (HDDs, SSDs)
  • Portable/Handheld Devices
  • Handheld Devices
  • Smartphone and PDA
  • Wireless/Networking Cards
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good