MIC2073-2YM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 210mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2073 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 160μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 115mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2073-2YM Overview
It is packaged in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has a total of 2 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It comes under the family of MIC2073.The operation is performed through the 8 pins.There is a maximum output of 500mAV from the LED driver.To meet the operation criteria, the maximum output current drops to 500mA.This lighting driver is mounted in the way of Surface Mount.210mOhm is the resistance of the lighting driver.It is set to 500mA in this case.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.For stable operation, the maximum operating temperature is 85°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.160μA is the maximum current required to operate it.
MIC2073-2YM Features
Resistance of 210mOhm
MIC2073-2YM Applications
There are a lot of Microchip Technology MIC2073-2YM Power Switches ICs applications.
- Hot Swap
- Smart Phones, Feature Phones
- Set-top-box
- Smartphone and PDA
- Handheld Devices
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- USB Power Distribution
- Hot Swaps
- USB Protection
