MIC2299-15YML-TR
| Parameters | |
|---|---|
| Current - Output / Channel | 3.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 2 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Max) | 10V |
| Voltage - Supply (Min) | 2.5V |
| Height | 830μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad, 12-MLF® |
| Number of Pins | 12 |
| Supplier Device Package | 12-MLF™ (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 2MHz |
| Base Part Number | MIC2299 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 9V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.5V |
| Output Current | 1A |
| Quiescent Current | 15mA |
| Voltage - Output | 30V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 10V |
| Output Current per Channel | 3.5A |
MIC2299-15YML-TR Overview
In order to save board space, the 12-VFDFN Exposed Pad, 12-MLF? package is used. It has 1 outputs for LED drivers.In order to mount the led light driver, Surface Mount is used.In this case, the DC DC Regulator emerges as highly efficient and reliable.It is capable of operating at a temperature of -40°C~125°C TJ. It provides considerable benefits for Backlight.The system operates on the basis of the frequency 2MHz.The LED light driver is configured with a base of 0 pins.Under 2.5V voltage supply, undetermined failures may occur.There are 2 segments in it.It's mounted by Surface Mount.This LED driver has the part number MIC2299.10V is an acceptable maximum value for the supply voltage.There is 30V voltage output from it.It is designed to provide an output voltage of 10V as its maximum value.A minimal input voltage of 2.5V is required for it to operate.For maximum efficiency, it operates at the minimal voltage of 2.5V.The maximum supply current is reached when 10V is reached.A stable operating temperature of 125°C is required.Loads can only be powered by 1A current.For stable operation, the operating temperature should be higher than -40°C.The power of systems depends on having 9V voltages inside.When the switching frequency is maintained at 2MHz, this electronic component is able to fully play its functions.The consumption of current is 15mAin the absence of external factors.
MIC2299-15YML-TR Features
Available in the 12-VFDFN Exposed Pad, 12-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
Operating with the supply voltage of 9V
Switching frequency of 2MHz
MIC2299-15YML-TR Applications
There are a lot of Microchip Technology MIC2299-15YML-TR LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- Other Electronic Devices
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Gallery lighting
- Dimmable LED for vehicle interiors
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
