MIC2544-1YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 80mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.5A |
| Base Part Number | MIC2544 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Height | 900μm |
| Length | 3.1mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2544-1YMM Overview
The package is in the form of a Tube.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.The mounting type of the LED driver is Surface Mount.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Status Flag features are available on the lighting driver.It is a member of the MIC2544 family.The 8 pins are used to operate the LED driver.1.5AV is the maximum output of the LED driver.To meet the operation criteria, the maximum output current drops to 1.5A.In this case, it is mounted in the way of Surface Mount.It has 80mOhm resistance.A maximum input voltage of 5.5V volts can be applied to it.The input voltage minimum is 2.7V volts.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It is also capable of running at 2.7V volts if necessary.
MIC2544-1YMM Features
Resistance of 80mOhm
MIC2544-1YMM Applications
There are a lot of Microchip Technology MIC2544-1YMM Power Switches ICs applications.
- Wearable Devices
- Storage Drives
- Gaming
- USB Protection
- Hot Swap
- Portable/Handheld Devices
- PC Card Hot Swap
- Mobile Communication Devices
- Smartphone and PDA
- Notebook and Tablet Computers
